化工儀器網手機版
移動端訪問更便捷您訪問的專業銷售 英國Uniscan Instruments SKP370 掃描開爾文探針系統產品信息,由北京恒遠安諾科技有限公司自行發布提供,產品價格為面議,如您想了解更多關于專業銷售 英國Uniscan Instruments SKP370 掃描開爾文探針系統型號、參數、用途等信息,歡迎咨詢。
該內容的真實性、準確性和合法性由發布會員負責,為保障安全,建議您在購買相關產品前務必確認供應商資質以及產品質量!
化工儀器網手機版
移動端訪問更便捷
化工儀器網小程序
更多流量 更易傳播
公眾號:chem17
隨時掌握行業動態
| 面議 |
經銷商
2406
北京市
2024/6/18 16:12:03
產品簡介
The Scanning Kelvin Probe (SKP) is a non-contact, non-destructive instrument designed to measure the surface work function difference between conducting, coated, or semi-conducting materials and a metallic probe. The technique operates using a vibrating capacitance probe, and through a swept backing potential, the work function difference is measured between the scanning probe reference tip and sample surface. The work function can be directly correlated to the surface condition. A unique aspect of the SKP is its ability to make measurements in a humid or gaseous environment. Applications include: -
The principle of operation of the Kelvin Probe is illustrated in Figure 1.
The figure represents three energy level diagrams depicting two metals having a constant separation, work functions and Fermi levels of (φ1, E1) and (φ2, E2), respectively.
The first diagram shows the metals with no electrical contact and differing Fermi levels. When electrical contact is made (middle diagram) the flow of charge allows the Fermi levels to equalize and gives rise to a surface charge.
The potential difference, VC, is related to the difference in work function:
-eVC = φ1 - φ2 (1) where e is the electron charge.
The inclusion of an external backing potential, VB (final diagram), allows for a nulling of the surface charge at a unique point where VB = - VC. This point represents the work function difference between the two materials. Work function can then be used to determine the corrosion potential (Ecorr) at a specific point using the relationship:
Ecorr = Constant + (φ1 - φ2) (2) where (φ1 - φ2) is the measured work function between the probe and the sample.
The constant can be determined by measuring the corrosion potential using a conventional reference electrode in an electrolyte. Once the constant is known for a particular sample, Ecorr can be calculated directly from the SKP data without an electrolyte.
Figure 2 shows the Scanning Kelvin Probe Measurement of filiform corrosion on Aluminium

Figure 3 shows a surface map of the Scanning Kelvin Probe signal recorded over the heat affected zone of welded material.

Figure 4 shows a surface map of the Scanning Kelvin Probe signal recorded over a printed circuit board.
如果您對本品感興趣請與我公司
北京東方安諾生化科技有限公司
: -8007
: www.annovatech.com
: caoye513
留言咨詢
您訪問的專業銷售 英國Uniscan Instruments SKP370 掃描開爾文探針系統產品信息,由北京恒遠安諾科技有限公司自行發布提供,產品價格為面議,如您想了解更多關于專業銷售 英國Uniscan Instruments SKP370 掃描開爾文探針系統型號、參數、用途等信息,歡迎咨詢。
該內容的真實性、準確性和合法性由發布會員負責,為保障安全,建議您在購買相關產品前務必確認供應商資質以及產品質量!
相關分類
該廠商其他產品
*您想獲取產品的資料:
個人信息:
用戶評論
發布評論